Caracterografo para sistemas fotovoltaicos

GERARDO BARRERA HUERTA

En la actualidad el aumento del uso de las energías renovables las ha llevado a su rápida evolución, así como a la necesidad del desarrollo acelerado de la tecnología entorno a estas. La energía solar fotovoltaica, es una de las de mayor alcance, esto gracias al potencial solar con el que cuenta México, lo que la hace ideal para usos a pequeña y gran escala en casi todo el país, sin embargo, la energía fotovoltaica para su uso tiene la limitante de requerir un control y una forma de monitoreo propia, que nos ofrezca los datos de generación real dada por este, en condiciones reales de operación. En este presente trabajo se realizó el diseño de un dispositivo, sistema capaz de obtener todos estos datos, tales como voltaje a circuito abierto (Voc), corriente de corto circuito (Isc), voltaje en el punto máximo de potencia (Vmpp), corriente en el punto máximo de potencia (Impp), punto de potencia máxima (Pmax), factor forma (FF), prestación, trazo de la característica I-V así como la obtención de las condiciones ambientales a las que está trabajando el módulo fotovoltaico, el traslado de estos datos a condiciones estándar de operación, y poder así con esto realizar la comparación de la información dada por el fabricante, logrando así tener los datos reales de la generación del sistema fotovoltaico para pronósticos o evaluación del funcionamiento de este. Este diseño se logró de la forma más simple y practica para impulsar el uso de la energía fotovoltaica, de ahí su importancia para promover el uso de esta y obtener sistemas más sustentables a costos más accesibles.

Currently, the increase in the use of renewable energies has led to a rapid evolution, as well as the need for accelerated development of technology around these. Photovoltaic solar energy is one of the largest, thanks to Mexico's solar potential, which makes it ideal for small and large-scale uses in almost the entire country, however, photovoltaic energy for its use has the limitation of requiring control and a form of own monitoring, which offers us the real generation given by this, in real operating conditions. In this present work we designed a device, a system capable of obtaining all these data, such as open-circuit voltage (Voc), short-circuit current (Isc), voltage at the maximum power point (Vmpp), current at the maximum point of power (Impp), point of maximum power (Pmax), form factor (FF), performance, trace of the characteristic IV as well as the obtaining of the environmental conditions to which the photovoltaic module is working, the transfer of these data to standard conditions of operation, and thus be able to make the comparison of the information given by the manufacturer, thus achieving the real data of the generation of the photovoltaic system for forecasts or evaluation of the operation of this. This design was achieved in the simplest and most practical way to promote the use of photovoltaic energy, hence its importance to promote the use of this and obtain more sustainable systems.

Tipo de documento: Tesis de maestría

Formato: Adobe PDF

Audiencia: Investigadores

Idioma: Español

Área de conocimiento: INGENIERÍA Y TECNOLOGÍA

Campo disciplinar: CIENCIAS TECNOLÓGICAS

Nivel de acceso: Acceso Abierto