dc.rights.license | http://creativecommons.org/licenses/by-nc/4.0 - Atribución-NoComercial | es_MX |
dc.contributor | PEDRO ANTONIO MARQUEZ AGUILAR | es_MX |
dc.contributor.author | VERONICA GONZALEZ MOLINA | es_MX |
dc.contributor.other | director - Director | es_MX |
dc.coverage.spatial | MEX - México | es_MX |
dc.date | 2019-05-12 | |
dc.date.accessioned | 2019-09-17T14:05:49Z | |
dc.date.available | 2019-09-17T14:05:49Z | |
dc.identifier.uri | http://riaa.uaem.mx/handle/20.500.12055/925 | |
dc.description | RESUMEN
Los cerámicos de aluminio-silicatos obtenidos a partir de arcilla y otros
componentes tienen una amplia aplicación en diversas áreas de ingeniería.
Los cerámicos en base alunina-silica se obtienen de diversas maneras en un
rango de temperatura de 800-1000ºC. El objetivo del presente trabajo es el
desarrollo de síntesis de materiales cerámicos con ahorro de energía y agua
a partir del uso de desechos generados a gran escala como son el vidrio y
biosólidos. Se espera un ahorro de energía por medio de la disminución de
temperatura de sinterizado del cerámico que sea alcanzada mediante
aditivos fusibles de silicato-vidrio de bajo punto de fusión que sirve como
unión de los gránulos de meta-caolinita o silimanita, las cuales se forman al
desintegrarse la arcilla mineral. Se desarrollaron materiales cerámicos
(ladrillos) a base de arcilla roja, vidrio y tezontle. La idea del uso de estos
componentes se debe a la reducción de la temperatura de sinterización de la
arcilla, ya que el vidrio tiene un punto de fusión bajo en un rango de (700 -
800) ºC y el tezontle es una combinación de diferentes silicatos
multicomponentes. Al mezclarlos y dar un tratamiento térmico se genera un
punto eutéctico, y de esta forma de logra reducir la temperatura de
sinterización de los ladrillos en un rango de (800-900) ºC. Para el moldeo
plástico de las mezclas se utilizaron biosólidos (lodos húmedos) como
sustituto de agua, estos residuos se generan en las plantas de tratamiento de
agua residuales, los cuales contienen hasta un 80% de agua. Su introducción
conduce a la eliminación del consumo de agua en la producción de ladrillos
cerámicos a gran escala y asegura la neutralización de los biosólidos. De
esta forma generar un ahorro de agua.La sinterización de las mezclas se
realizó en una atmosfera de aire y argón, obteniendo materiales cerámicos
con diferente porosidad y resistencia, así como cerámicas carbonizadas con
propiedades de adsorción. Con aplicación en la construcción y en el
tratamiento efluentes textiles. Así como también se sinterizaron a escala
industrial ladrillos cerámicos. | es_MX |
dc.description | ABSTRACT
The alumino-silicates ceramics obtained from clay and other components
have a wide application in various engineering areas. Alunin-silica-based
ceramics are obtained in various ways in a temperature range of 800-1000ºC.
The objective of this work is the development of synthesis of ceramic
materials with energy and water savings from the use of large scale waste
such as glass and biosolids. An energy saving is expected by means of the
reduction of sintering temperature of the ceramic that is reached by means of
fusible additives of silicate-glass of low melting point that serves as a union of
the granules of meta-kaolinite or sillimanite, which are formed when the
mineral clay disintegrates. Ceramic materials (bricks) based on red clay,
glass and tezontle were developed. The idea of the use of these components
is due to the reduction of the sintering temperature of the clay, since the glass
has a low melting point in a range of (700 - 800) ºC and the tezontle is a
combination of different silicates multicomponent. When mixing them and
giving a thermal treatment a eutectic point is generated, and in this way it
manages to reduce the sintering temperature of the bricks in a range of (800-
900) ºC. For the plastic molding of the mixtures, biosolids (wet sludge) were
used as a substitute for water, this waste is generated in wastewater
treatment plants, which contain up to 80% water. Its introduction leads to the
reduction of water consumption in the production of large-scale ceramic
bricks and ensures the neutralization of biosolids. In this way generate a
saving of water.
The sintering of the mixtures was carried out in an atmosphere of air and
argon, obtaining ceramic materials with different porosity and strength, as well
as carbonized ceramics with adsorption properties. With applications in the
construction and treatment of textile effluents. Thus, an industrial climbing of
ceramic bricks will also be sintered. | es_MX |
dc.format | pdf - Adobe PDF | es_MX |
dc.language | spa - Español | es_MX |
dc.publisher | El autor | es_MX |
dc.rights | openAccess - Acceso Abierto | es_MX |
dc.subject | 7 - INGENIERÍA Y TECNOLOGÍA | es_MX |
dc.subject.other | 33 - CIENCIAS TECNOLÓGICAS | es_MX |
dc.title | Síntesis y desarrollo de materiales cerámicos con desechos, para la construcción y diferentes aplicaciones | es_MX |
dc.type | doctoralThesis - Tesis de doctorado | es_MX |
uaem.unidad | Instituto de Investigación en Ciencias Básicas y Aplicadas (IICBA) - Instituto de Investigación en Ciencias Básicas y Aplicadas (IICBA) | es_MX |
uaem.programa | Doctorado en Ingeniería y Ciencias Aplicadas - Doctorado en Ingeniería y Ciencias Aplicadas | es_MX |
dc.type.publication | acceptedVersion | es_MX |
dc.audience | researchers - Investigadores | es_MX |